Cisco Catalyst 4500 Series Command Reference Manual page 364

ip arp inspection vlan logging
Examples This example shows how to configure an ARP inspection on VLAN 1 to add packets to a log on matching
against the ACLs with the logging keyword:
Switch# config terminal
Enter configuration commands, one per line.
Switch(config)# ip arp inspection vlan 1 logging acl-match matchlog
Switch(config)# end
Switch# show ip arp inspection vlan 1
Source Mac Validation
Destination Mac Validation : Disabled
IP Address Validation
Vlan
----
Vlan
----
Switch#
Related Commands Command
arp access-list
show ip arp inspection
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-306
Configuration
-------------
1 Enabled
ACL Logging
-----------
1 Acl-Match
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
End with CNTL/Z.
: Enabled
: Disabled
Operation ACL Match
--------- ---------
Active
DHCP Logging
------------
Deny
Description
Defines an ARP access list or adds clauses at the end of a
predefined list.
Displays the status of dynamic ARP inspection for a
specific range of VLANs.
Static ACL
----------
OL-27596 -01