Show Slavebootflash - Cisco Catalyst 4500 Series Command Reference Manual

show slavebootflash:

show slavebootflash:
To display information about the standby bootflash file system, use the show slavebootflash: command.
Syntax Description
all
chips
filesys
Defaults This command has no default settings.
Command Modes
Privileged EXEC mode
Command History Release
12.1(8a)EW
Examples This example shows how to display file system status information:
Switch# show slavebootflash: filesys
-------- F I L E
Device Number = 0
DEVICE INFO BLOCK: bootflash
Magic Number
Length
Programming Algorithm = 39
File System Offset
MONLIB Offset
Bad Sector Map Offset = 3FFF8
Squeeze Log Offset
Squeeze Buffer Offset = FC0000
Num Spare Sectors
STATUS INFO:
Writable
NO File Open for Write
Complete Stats
No Unrecovered Errors
No Squeeze in progress
USAGE INFO:
Bytes Used
Bad Sectors
OK Files
Deleted Files
Files w/Errors = 0
Switch>
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-920
show slavebootflash: [all | chips | filesys]
(Optional) Displays all possible Flash information.
(Optional) Displays Flash chip information.
(Optional) Displays file system information.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
S Y S T E M
= 6887635
= 1000000
= 40000
= 100
= F80000
= 0
Spares:
= 917CE8
= 0
= 2
= 0
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
S T A T U S --------
File System Vers = 10000
Sector Size
Erased State
Length = F40000
Length = C628
Length = 8
Length = 40000
Length = 40000
Bytes Available = 628318
Spared Sectors = 0
Bytes = 917BE8
Bytes = 0
Bytes = 0
(1.0)
= 40000
= FFFFFFFF
OL-27596 -01