Debug Monitor - Cisco Catalyst 4500 Series Command Reference Manual

debug monitor

debug monitor
To display the monitoring activity, use the debug monitor command. To disable the debugging output,
use the no form of this command.
Syntax Description
all
errors
idb-update
list
notifications
platform
requests
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
Examples This example shows how to debug the monitoring errors:
Switch# debug monitor errors
SPAN error detail debugging is on
Switch#
Related Commands Command
undebug monitor (same as no debug
monitor)
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-158
debug monitor {all | errors | idb-update | list | notifications | platform | requests}
no debug monitor {all | errors | idb-update | list | notifications | platform | requests}
Displays all the SPAN debugging messages.
Displays the SPAN error details.
Displays the SPAN IDB update traces.
Displays the SPAN list tracing and the VLAN list tracing.
Displays the SPAN notifications.
Displays the SPAN platform tracing.
Displays the SPAN requests.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Disables debugging output.
OL-27596 -01