Show Mac-Address-Table Count - Cisco Catalyst 4500 Series Command Reference Manual

show mac-address-table count

show mac-address-table count
To display the number of entries currently in the MAC address table, use the show mac-address-table
count command.
Syntax Description vlan vlan_id
Defaults
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
12.1(12c)EW
Examples This example shows how to display the entry count for a specific VLAN:
Switch# show mac-address-table count vlan 1
MAC Entries for Vlan 1:
Dynamic Unicast Address Count:
Static Unicast Address (User-defined) Count:
Static Unicast Address (System-defined) Count: 1
Total Unicast MAC Addresses In Use:
Total Unicast MAC Addresses Available:
Multicast MAC Address Count:
Total Multicast MAC Addresses Available:
Switch#
Related Commands Command
show mac-address-table address
show mac-address-table aging-time
show mac-address-table dynamic
show mac-address-table interface
show mac-address-table multicast
show mac-address-table protocol
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-826
show mac-address-table count [vlan vlan_id]
(Optional) Specifies a VLAN; valid values are from 1 to 4094.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Added support for extended VLAN addresses.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
0
0
1
32768
1
16384
Description
Displays the information about the MAC-address table.
Displays MAC address table aging information.
Displays the dynamic MAC address table entries only.
Displays the MAC address table information for a specific
interface.
Displays information about the multicast MAC address
table.
Displays the MAC address table information that is based
on the protocol.
OL-27596 -01