Cisco Catalyst 4500 Series Command Reference Manual page 108

Cisco ios command reference release ios xe 3.4.0sg and ios 15.1(2)sg
Hide thumbs Also See for Catalyst 4500 Series:
Table of Contents

Advertisement

auto qos classify police
vulnerability because user whose PC was connected to an IP phone connected to a switch would be able
to re-mark DSCP markings of traffic arising from their PC to dscp ef using the NIC on their PC. This
places non real-time traffic in the priority queue in the egress direction.
B. Template for the input service-policy of the auto qos classify police command
policy-map AutoQos-4.0-Classify-Police-Input-Policy
C. Template for egress queue classes along with the SRND4 output policy that uses the egress classes to
allocate eight queues. This template is required by the four SRND4 commands:
class-map match-all AutoQos-4.0-Priority-Queue
class-map match-all AutoQos-4.0-Control-Mgmt-Queue
class-map match-all AutoQos-4.0-Multimedia-Conf-Queue
class-map match-all AutoQos-4.0-Multimedia-Stream-Queue
class-map match-all AutoQos-4.0-Trans-Data-Queue
class-map match-all AutoQos-4.0-Bulk-Data-Queue
class-map match-any AutoQos-4.0-Scavenger-Queue
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-50
class AutoQos-4.0-Multimedia-Conf-Classify
set dscp af41
set cos 4
set qos-group 34
police cir 5000000 bc 8000
exceed-action drop
class AutoQos-4.0-Signaling-Classify
set dscp cs3
set cos 3
set qos-group 16
police cir 32000 bc 8000
exceed-action drop
class AutoQos-4.0-Transaction-Classify
set dscp af21
set cos 2
set qos-group 18
police cir 10000000 bc 8000
exceed-action set-dscp-transmit cs1
exceed-action set-cos-transmit 1
class AutoQos-4.0-Bulk-Data-Classify
set dscp af11
set cos 1
set qos-group 10
police cir 10000000 bc 8000
exceed-action set-dscp-transmit cs1
exceed-action set-cos-transmit 1
class AutoQos-4.0-Scavenger-Classify
set dscp cs1
set cos 1
set qos-group 8
police cir 10000000 bc 8000
exceed-action drop
class AutoQos-4.0-Default-Classify
set dscp default
set cos 0
police cir 10000000 bc 8000
exceed-action set-dscp-transmit cs1
exceed-action set-cos-transmit 1
match qos-group 32
match qos-group 16
match qos-group 34
match qos-group 26
match qos-group 18
match qos-group 10
match qos-group 8
match dscp cs1
Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
OL-27596 -01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents