Show Interfaces Status - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show interfaces status

To display the interface status or a list of interfaces in error-disabled state, use the show interfaces
status command.
Syntax Description err-disabled
inactive
module module
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
12.2(40)SG
12.2(52)SG
Usage Guidelines When at least one VLAN on a port is error-disabled the output for the show interfaces status command
will display vl-err-dis in the VLAN column.
Examples This example shows how to display the status of all interfaces:
Switch# show interfaces status
Port
Te1/1
Te1/2
Switch#
This example shows how to display the status of interfaces in an error-disabled state:
Switch# show interfaces status err-disabled
Port
----
Fa9/4
Fa9/5
Fa9/6
Switch#
OL-27596 -01
show interfaces status [err-disabled | inactive ] [module {module}]
(Optional) Displays interfaces in error-disabled state.
(Optional) Displays interfaces in inactive state.
(Optional) Displays interfaces on a specific module.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Support for WS-X4606-10GE-E Twin Gigabit converter introduced.
Support for per-VLAN error-disable was introduced by adding Err-Disabled VLAN
column to output.
Name
Name
----
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
Status Vlan Duplex Speed Type
connected 1 full
connected vl-err-dis full
Status Reason
------ -------
notconnect link-flap
err-disabled psecure_violation
connected psecure_violation
show interfaces status
10G 10GBase-LR
10G 10GBase-LR
Err-Disabled VLANs
-------------------
3-5
10,15
2-721