Show Mac-Address-Table Aging-Time - Cisco Catalyst 4500 Series Command Reference Manual

show mac-address-table aging-time

show mac-address-table aging-time
To display the MAC address aging time, use the show mac-address-table aging-time command.
Syntax Description
vlan vlan_id
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
12.1(12c)EW
Examples This example shows how to display the currently configured aging time for all VLANs:
Switch# show mac-address-table aging-time
Vlan
----
100
200
Switch#
This example shows how to display the currently configured aging time for a specific VLAN:
Switch# show mac-address-table aging-time vlan 100
Vlan
----
100
Switch#
Related Commands Command
show mac-address-table address
show mac-address-table count
show mac-address-table dynamic
show mac-address-table interface
show mac-address-table multicast
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-824
show mac-address-table aging-time [vlan vlan_id]
(Optional) Specifies a VLAN; valid values are from 1 to 4094.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Support for extended addressing was added.
Aging Time
----------
300
1000
Aging Time
----------
300
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Displays the information about the MAC-address table.
Displays the number of entries currently in the MAC
address table.
Displays the dynamic MAC address table entries only.
Displays the MAC address table information for a specific
interface.
Displays information about the multicast MAC address
table.
OL-27596 -01