Show Monitor - Cisco Catalyst 4500 Series Command Reference Manual

show monitor

show monitor
To display information about the SPAN session, use the show monitor command.
Syntax Description
session
range
session-range
local
remote
all
session-number
detail
Defaults The detail keyword only displays lines with a nondefault configuration.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
12.1(13)EW
12.1(19)EW
12.1(20)EW
12.2(20)EW
Examples This example shows how to display whether ACLs are applied to a given SPAN session on a
Catalyst 4500 series switch:
Switch# show monitor
Session 1
---------
Type
Source Ports
Destination Ports : Fa6/2
Filter VLANs
IP Access-group
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-856
show monitor [session] [range session-range | local | remote | all | session-number] [detail]
(Optional) Displays the SPAN information for a session.
(Optional) Displays information for a range of sessions.
(Optional) Specifies a range of sessions.
(Optional) Displays all local SPAN sessions.
(Optional) Displays the RSPAN source and destination sessions.
(Optional) Displays the SPAN and RSPAN sessions.
(Optional) Session number; valid values are from1 to 6.
(Optional) Displays the detailed SPAN information for a session.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Added support for differing directions within a single user session.
Output enhanced to display configuration status of SPAN enhancements.
Added support to display configuration state for remote SPAN and learning.
Added support to display ACLs that are applied to SPAN sessions.
: Local Session
:
Both : Fa6/1
Encapsulation : Native
Ingress : Disabled
Learning : Disabled
: 1
: 10
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
OL-27596 -01