Show Macro Auto Monitor Clients - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show macro auto monitor clients

To display the clients using the device classifier facility on the switch, use the show macro auto monitor
clients user EXEC command.
Syntax Description This command has no arguments or keywords.
Command Default
User EXEC
Privileged EXEC
Command History Release
Release IOS XE 3.3.0
SG (15.1(1)SG)
Usage Guidelines Device classifier (DC) is enabled by default when you enable a client application (for example, Auto
Smartports) that uses its functionality. Use the show macro auto monitor clients command to display
the clients that are using the DC feature on the switch.
As long as any clients are using the DC, you cannot disable it by using the no macro auto monitor
command. If you attempt to disable the DC while a client is using it, an error message appears.
Examples
This example shows how to use the show macro auto monitor clients privileged EXEC command to
view the clients using the DC on the switch:
Switch# show macro auto monitor clients
Client Name
====================
Auto Smart Ports
This example shows the error message that appears when you attempt to disable DC while a client is
using it:
Switch(config)# no macro auto monitor
These subsystems should be disabled before disabling Device classifier
Auto Smart Ports
% Error - device classifier is not disabled
Related Commands Command
macro auto device
macro auto execute (built-in
function)
macro auto global processing
OL-27596 -01
show macro auto monitor clients
Modification
This command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
Description
Configures macro default parameter values.
Configures mapping from an event trigger to a built-in macro.
Enables Auto Smartports on a switch.
show macro auto monitor clients
2-847