Show Interfaces Trunk - Cisco Catalyst 4500 Series Command Reference Manual

show interfaces trunk

show interfaces trunk
To display port and module interface-trunk information, use the show interfaces trunk command.
Syntax Description
module mod
Defaults
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
Usage Guidelines
If you do not specify a keyword, only information for trunking ports is displayed.
Examples This example shows how to display interface-trunk information for module 5:
Switch# show interfaces trunk module 5
Port
Fa5/1
Fa5/2
Fa5/3
Fa5/4
Fa5/5
Fa5/6
Fa5/7
Fa5/8
Fa5/9
Fa5/10
Fa5/11
Fa5/12
...
Fa5/48
Port
Fa5/1
Fa5/2
Fa5/3
Fa5/4
Fa5/5
Fa5/6
Fa5/7
Fa5/8
Fa5/9
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-730
show interfaces trunk [module mod]
(Optional) Limits the display to interfaces on the specified module; valid values are
from 1 to 6.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Mode Encapsulation
routed negotiate
routed negotiate
routed negotiate
routed negotiate
routed negotiate
off negotiate
off negotiate
off negotiate
desirable n-isl
desirable negotiate
routed negotiate
routed negotiate
routed negotiate
Vlans allowed on trunk
none
none
none
none
none
none
none
200
1-1005
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Status Native vlan
routed 1
routed 1
routed 1
routed 1
routed 1
not-trunking 10
not-trunking 10
not-trunking 1
trunking 1
not-trunking 1
routed 1
routed 1
routed 1
OL-27596 -01