Show Auto Install Status - Cisco Catalyst 4500 Series Command Reference Manual

show auto install status

show auto install status
To display the status of an automatic installation, use the show auto install status command.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.2(20)EW
Examples
This example shows how to display the IP address of the TFTP server and to display whether or not the
switch is currently acquiring the configuration file on the TFTP server:
Switch# show auto install status
Status
DHCP Server
TFTP Server
Config File Fetched : Undetermined
The first IP address in the display indicates the server that is used for the automatic installation. The
second IP address indicates the TFTP server that provided the configuration file.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-648
show auto install status
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
: Downloading config file
: 20.0.0.1
: 30.0.0.3
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
OL-27596 -01