Show Issu Endpoints - Cisco Catalyst 4500 Series Command Reference Manual

show issu endpoints

show issu endpoints
To display the ISSU endpoint information, use the show issu endpoints command.
Syntax Description
This command has no arguments or keywords
Defaults
This command has no default settings.
Command Modes User EXEC mode
Command History Release
12.2(31)SGA
Usage Guidelines
Endpoint is an execution unit within a redundancy domain. There are only 2 endpoints on the Catalyst
4500 series switch redundant chassis: 1 and 2. The endpoints correspond to the slot numbers for the
supervisor engine. The ISSU infrastructure communicates between these two endpoints to establish
session and to perform session negotiation for ISSU clients.
Examples
The following example shows how to display the ISSU endpoints:
Switch# show issu endpoints
My_Unique_ID = 1/0x1,
This endpoint communicates with 1 peer endpoints :
Peer_Unique_ID
Shared Negotiation Session Info :
Switch#
Related Commands Command
show issu clients
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-796
show issu endpoints
Modification
This command was introduced on the Catalyst 4500 series switch.
Client_Count = 46
CAP
2/0x2 1
Nego_Session_ID = 15
Nego_Session_Name = shared nego session
Transport_Mtu = 4096
Ses_In_Use = 2
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
VER XFORM ERP
1 1 1
Description
Displays the ISSU clients.
Compatibility
Same
OL-27596 -01