Show Interfaces Mtu - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show interfaces mtu

To display the maximum transmission unit (MTU) size of all the physical interfaces and SVIs on the
switch, use the show interfaces mtu command.
Syntax Description module mod
Defaults
This command has no default settings.
Command Modes EXEC
Command History Release
12.1(13)EW
Examples
This example shows how to display the MTU size for all interfaces on module 1:
Switch> show interfaces mtu module 1
Port
Gi1/1
Gi1/2
Switch>
Related Commands Command
mtu
OL-27596 -01
show interfaces mtu [module mod]
(Optional) Limits the display to interfaces on a specific module.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Name
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
MTU
1500
1500
Description
Enables jumbo frames on an interface by adjusting the
maximum size of a packet or maximum transmission unit
(MTU).
show interfaces mtu
2-719