Debug Platform Pm - Cisco Catalyst 3650 Command Reference Manual

debug platform pm

debug platform pm

To enable debugging of the platform-dependent port manager software module, use the debug platform pm
command in privileged EXEC mode. To disable debugging, use the no form of this command.
debug platform pm {all| counters| errdisable| fec| if-numbers| l2-control| link-status| platform| pm-spi|
pm-vectors [detail]| ses| vlans}
no debug platform pm {all| counters| errdisable| fec| if-numbers| l2-control| link-status| platform| pm-spi|
pm-vectors [detail]| ses| vlans}
Syntax Description
all
counters
errdisable
fec
if-numbers
l2-control
link-status
platform
pm-spi
pm-vectors
detail
ses
vlans
Command Default
Debugging is disabled.
Command Modes
Privileged EXEC
Layer 2/3 Command Reference, Cisco IOS XE Release 3.6E (Catalyst 3650 Switch)
34
Displays all port manager debug messages.
Displays counters for remote procedure call (RPC) debug messages.
Displays error-disabled-related events debug messages.
Displays forwarding equivalence class (FEC) platform-related events
debug messages.
Displays interface-number translation event debug messages.
Displays Layer 2 control infra debug messages.
Displays interface link-detection event debug messages.
Displays port manager function event debug messages.
Displays port manager stateful packet inspection (SPI) event debug
messages.
Displays port manager vector-related event debug messages.
(Optional) Displays vector-function details.
Displays service expansion shelf (SES) related event debug messages.
Displays VLAN creation and deletion event debug messages.
Layer 2/3 Commands
OL-32639-01