Clear Nmsp Statistics; Defaults No Default Is Defined - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

clear nmsp statistics

To clear the Network Mobility Services Protocol (NMSP) statistics, use the clear nmsp statistics
command. This command is available only when your switch is running the cryptographic (encrypted)
software image.
Syntax Description This command has no arguments or keywords.
Defaults No default is defined.
Command Modes
Privileged EXEC mode
Command History Release
12.2(52)SG
Examples
This example shows how to clear NMSP statistics:
Switch# clear nmsp statistics
Switch#
You can verify that information was deleted by entering the show nmsp statistics command.
Related Commands Command
show nmsp
OL-27596 -01
clear nmsp statistics
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
Description
Displays the NMSP information.
clear nmsp statistics
2-123