Authentication Critical Recovery Delay - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

authentication critical recovery delay

To configure the 802.1X critical authentication parameters, use the authentication critical recovery
delay command in global configuration mode. To return to the default settings, use the no form of this
command.
Syntax Description
milliseconds
Command Default
10000 milliseconds
Command Modes
Global configuration mode
Command History Release
12.2(50)SG
Usage Guidelines
The authentication critical recovery delay command replaces the following dot1x command, which is
deprecated in Cisco IOS Release 12.2(50)SG and later releases:
dot1x critical recovery delay milliseconds
You can verify your settings by entering the show authentication privileged EXEC command.
Examples
This example shows how to set the recovery delay period that the switch waits to reinitialize a critical
port when an unavailable RADIUS server becomes available:
Switch(config)# authentication critical recovery delay 1500
Switch(config)#
Related Commands Command
show authentication
OL-27596 -01
authentication critical recovery delay milliseconds
no authentication critical recovery delay
Specifies the recovery delay period in milliseconds to wait to reinitialize a
critical port when an unavailable RADIUS server becomes available. The
rang is 1 to 10000 milliseconds.
Modification
Support for this command was introduced.
Description
Displays Authentication Manager information.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
authentication critical recovery delay
2-25