Cisco Catalyst 4500 Series Command Reference Manual page 469

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Table 2-10
Subcommand
dest-mac mask
name-coded
ethertype
no
permit
protocol-family
src-mac mask
Table 2-11
Table 2-11
Protocol Family
Appletalk
Arp-Non-Ipv4
Decnet
OL-27596 -01
mac access-list extended Subcommands (continued)
Description
(Optional) Specifies a destination MAC address of the form:
dest-mac-address dest-mac-address-mask.
(Optional) Denotes a predefined name-coded ethertype for common protocols:
aarp—AppleTalk ARP
amber—DEC-Amber
appletalk—AppleTalk/EtherTalk
dec-spanning—DEC-Spanning-Tree
decnet-iv—DECnet Phase IV
diagnostic—DEC-Diagnostic
dsm—DEC-DSM
etype-6000—0x6000
etype-8042—0x8042
lat—DEC-LAT
lavc-sca—DEC-LAVC-SCA
mop-console—DEC-MOP Remote Console
mop-dump—DEC-MOP Dump
msdos—DEC-MSDOS
mumps—DEC-MUMPS
netbios—DEC-NETBIOS
protocol-family An Ethernet protocol family
vines-echo—VINES Echo
vines-ip—VINES IP
xns-idp—XNS IDP
(Optional) Deletes a statement from an access list.
Allows access if the conditions are matched.
(Optional) Name of the protocol family.
mapped to a particular protocol family.
Source MAC address in the form:
source-mac-address source-mac-address-mask.
describes mapping an Ethernet packet to a protocol family.
Mapping an Ethernet Packet to a Protocol Family
Ethertype in Packet Header
0x809B, 0x80F3
0x0806 and protocol header of Arp is a non-Ip protocol family
0x6000-0x6009, 0x8038-0x8042
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
mac access-list extended
Table 2-11 lists which packets are
2-411