Cisco Catalyst 4500 Series Command Reference Manual page 877

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Table 2-37
Authorizing
Terminate
Table 2-38
Table 2-38
Status
AUTHORIZED
UNAUTHORIZED
Examples The following example shows how to display MAB information:
Switch# show mab all
MAB details for GigaEthernet1/3
-------------------------------------
Mac-Auth-Bypass = Enabled
Inactivity Timeout = None
Switch#
The following example shows how to display detailed MAB information:
Switch# show mab all detail
MAB details for GigaEthernet1/3
-------------------------------------
Mac-Auth-Bypass = Enabled
Inactivity Timeout = None
MAB Client List
---------------
Client MAC = 000f.23c4.a401
MAB SM state = TERMINATE
Auth Status = AUTHORIZED
The following example shows how to display MAB information for a specific interface:
Switch# show mab interface GigaEthernet1/3
MAB details for GigaEthernet1/3
-------------------------------------
Mac-Auth-Bypass = Enabled
Inactivity Timeout = None
OL-27596 -01
MAB State Machine Values (continued)
Intermediate
Terminal
lists the possible displayed values for the MAB authorization status.
MAB Authorization Status Values
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
The state of the session during MAC-based
authorization
The state of the session once a result has been
obtained. For a session in terminal state,
"TERMINATE" displays.
Description
The session has successfully authorized.
The session has failed to be authorized.
show mab
2-819