Interface (Virtual Switch) - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

interface (virtual switch)

To select an interface to configure and enter interface configuration mode, use the interface global
configuration mode command.
Syntax Description interface
switch-num
slot
port
.subinterface
Defaults
No interface types are configured.
Command Modes
Global configuration mode
Command History Release
Cisco IOS XE 3.4.0SG and
15.1(2)SG
Usage Guidelines Table 2-9
Table 2-9
Keyword
fastethernet
gigabitethernet
tengigabitethernet
vlan
port-channel
null
tunnel
OL-27596 -01
interface [interface switch-num/slot/port.subinterface}
Specifies the interface to be configured; see
Specifies a switch ID.
Specifies a slot number.
Specifies a port number.
Specifies the port subinterface number.
lists the valid values for type.
Valid type Values
Definition
Fast Ethernet 802.3
Gigabit Ethernet IEEE 802.3z interface.
10-Gigabit Ethernet IEEE 802.3ae interface.
VLAN interface; see the
Port channel interface; see the
Null interface; the valid value is 0.
Tunnel interface
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
Modification
Support introduced on the Catalyt 4500 Series Switch.
interface vlan
interface port-channel
interface (virtual switch)
Table 2-9 for valid values.
command.
command.
2-287