Cisco Catalyst 4500 Series Command Reference Manual page 831

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Examples This section contains examples and field descriptions for the following forms of this command:
•
•
•
•
•
•
•
show ip wccp
The following is sample output from the show ip wccp service-number command:
Switch# show ip wccp 90
Global WCCP information:
Table 30
Table 30
Field
Router information
Protocol Version
Service Identifier
Number of Service Group Clients:
Number of Service Group Routers
Total Packets s/w Redirected
Redirect Access-list
Total Packets Denied Redirect
OL-27596 -01
show ip wccp service-number
show ip wccp service-number view
show ip wccp service-number detail
show ip wccp interfaces
show ip wccp web-cache
show ip wccp web-cache detail
show ip wccp
service-number
Router information:
Router Identifier:
Protocol Version:
Service Identifier: 90
Number of Service Group Clients:
Number of Service Group Routers:
Total Packets s/w Redirected:
Process:
CEF:
Redirect Access-list:
Total Packets Denied Redirect:
Total Packets Unassigned:
Group Access-list:
Total Messages Denied to Group:
Total Authentication failures:
Total Bypassed Packets Received:
describes the significant fields shown in the display.
show ip wccp service-number Field Descriptions
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
100.1.1.16
2.0
1
1
0
0
0
-none-
0
0
-none-
0
0
0
Description
A list of routers detected by the current router.
The version of WCCP being used by the router in the service
group.
Indicates which service is detailed.
The number of clients that are visible to the router and other
clients in the service group.
The number of routers in the service group.
Total number of packets s/w redirected by the router.
The name or number of the access list that determines which
packets will be redirected.
Total number of packets that were not redirected because they
did not match the access list.
show ip wccp
2-773