Show Interfaces Counters - Cisco Catalyst 4500 Series Command Reference Manual

show interfaces counters

show interfaces counters
To display the traffic on the physical interface, use the show interfaces counters command.
Syntax Description
all
detail
errors
storm-control
trunk
module mod
Defaults
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
12.1(19)EW
12.2(18)EW
Usage Guidelines If you do not enter any keywords, all the counters for all modules are displayed.
The display for the storm-control keyword includes the suppressed multicast bytes.
Examples This example shows how to display the error counters for a specific module:
Switch# show interfaces counters errors module 1
Port
Gi1/1
Gi1/2
Port
Gi1/1
Gi1/2
Switch#
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-712
show interfaces counters [all | detail | errors | storm-control | trunk] [module mod]
(Optional) Displays all the interface counters including errors, trunk, and detail.
(Optional) Displays the detailed interface counters.
(Optional) Displays the interface error counters.
(Optional) Displays the number of packets discarded due to suppression on the
interface.
(Optional) Displays the interface trunk counters.
(Optional) Limits the display to interfaces on a specific module.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Support for storm control.
Support for the display of total suppression discards.
Align-Err FCS-Err
0
0
Single-Col Multi-Col
0
0
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Xmit-Err Rcv-Err UnderSize
0 0
0 0
Late-Col Excess-Col Carri-Sen
0 0 0
0 0 0
0 0
0 0
Runts Giants
0 0
0 0
0
0
OL-27596 -01