Cisco Catalyst 4500 Series Command Reference Manual page 355

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Examples This example shows how to limit the rate of the incoming ARP requests to 25 packets per second:
Switch# config terminal
Switch(config)# interface fa6/3
Switch(config-if)# ip arp inspection limit rate 25
Switch(config-if)# end
Switch# show ip arp inspection interfaces fastEthernet 6/3
Interface
---------------
Fa6/3
Switch#
This example shows how to limit the rate of the incoming ARP requests to 20 packets per second and to
set the interface monitoring interval to 5 consecutive seconds:
Switch# config terminal
Switch(config)# interface fa6/1
Switch(config-if)# ip arp inspection limit rate 20 burst interval 5
Switch(config-if)# end
Related Commands Command
show ip arp inspection
OL-27596 -01
Trust State
-----------
Trusted
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
Rate (pps)
----------
25
Description
Displays the status of dynamic ARP inspection for a
specific range of VLANs.
ip arp inspection limit (interface)
2-297