Cisco Catalyst 4500 Series Command Reference Manual page 740

show dot1x
Related Commands Command
dot1x critical
dot1x critical eapol
dot1x critical recovery delay
dot1x critical vlan
dot1x guest-vlan
dot1x max-reauth-req
dot1x port-control
mac-address-table notification
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-682
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Enables the 802.1X critical authentication on a port.
Enables sending EAPOL success packets when a port is
critically authorized partway through an EAP exchange.
Sets the time interval between port reinitializations.
Assigns a critically authenticated port to a specific VLAN.
Enables a guest VLAN on a per-port basis.
Sets the maximum number of times that the switch will
retransmit an EAP-Request/Identity frame to the client
before restarting the authentication process.
Enables manual control of the authorization state on a port.
Enables MAC address notification on a switch.
OL-27596 -01