Cisco Catalyst 4500 Series Command Reference Manual page 127

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
would be able to remark DSCP markings of traffic arriving from their PC to DSCP ef using the NIC on
their PC. This results in incorrectly placing non real-time traffic in the priority queue in the egress
direction.
B. Template for the auto qos voip cisco-softphone command input service-policy
class AutoQos-4.0-Multimedia-Conf-Classify
C. Template for egress queue classes and the srnd4 output policy that uses the egress classes to allocate
eight queues. This template is required by all srnd4 commands:
class-map match-all AutoQos-4.0-Priority-Queue
class-map match-all AutoQos-4.0-Control-Mgmt-Queue
OL-27596 -01
policy-map AutoQos-4.0-Cisco-Softphone-Input-Policy
class AutoQos-4.0-VoIP-Data
set dscp ef
set cos 5
set qos-group 32
police cir 128000 bc 8000
exceed-action set-dscp-transmit cs1
exceed-action set-cos-transmit 1
class AutoQos-4.0-VoIP-Signal
set dscp cs3
set cos 3
set qos-group 16
police cir 32000 bc 8000
exceed-action set-dscp-transmit cs1
exceed-action set-cos-transmit 1
set dscp af41
set cos 4
set qos-group 34
police cir 5000000 bc 8000
exceed-action drop
class AutoQos-4.0-Signaling-Classify
set dscp cs3
set cos 3
set qos-group 16
police cir 32000 bc 8000
exceed-action drop
class AutoQos-4.0-Transaction-Classify
set dscp af21
set cos 2
set qos-group 18
police cir 10000000 bc 8000
exceed-action set-dscp-transmit cs1
exceed-action set-cos-transmit 1
class AutoQos-4.0-Bulk-Data-Classify
set dscp af11
set cos 1
set qos-group 10
police cir 10000000 bc 8000
exceed-action set-dscp-transmit cs1
exceed-action set-cos-transmit 1
class AutoQos-4.0-Scavenger-Classify
set dscp cs1
set cos 1
set qos-group 8
police cir 10000000 bc 8000
exceed-action drop
class AutoQos-4.0-Default-Classify
set dscp default
set cos 0
match qos-group 32
match qos-group 16
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
auto qos voip cisco-softphone
2-69