Ancp Mode Client - Cisco Catalyst 4500 Series Command Reference Manual

ancp mode client

ancp mode client
To set the router to become an ANCP client, use the ancp mode client command.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes Global configuration mode
Command History Release
12.2(50)SG
Usage Guidelines
To fully activate ANCP, the administrator must also set the ANCP server IP address to which the ANCP
client must connect.
Examples
This example shows how to set the router to become an ANCP client:
Switch# ancp mode client
Related Commands Command
ancp client server
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-18
ancp mode client
Modification
Support for this command was introduced on the Catalyst 4500 series
switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Displays multicast streams activated by ANCP.
OL-27596 -01