Cisco Catalyst 4500 Series Command Reference Manual page 135

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Related Commands Command
class
dbl
policy-map
priority
service-policy (policy-map
class)
shape (class-based queueing)
show policy-map
OL-27596 -01
Description
Specifies the name of the class whose traffic policy you want to
create or change.
Enables active queue management on a transmit queue used by a
class of traffic.
Creates or modifies a policy map that can be attached to multiple
ports to specify a service policy and to enter policy-map
configuration mode.
Enables the strict priority queue (low-latency queueing [LLQ])
and to give priority to a class of traffic belonging to a policy map
attached to a physical port.
Creates a service policy that is a quality of service (QoS) policy
within a policy map.
Enables traffic shaping a class of traffic in a policy map attached
to a physical port.
Displays information about the policy map.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
bandwidth
2-77