License Right-To-Use Activate - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

license right-to-use activate

This command only applies to Catalyst 4500-X and Supervisor Engine 7-E and 7L-E.
Note
To activate PRTU licenses use the license right-to-use activate command.
Syntax Description
feature-name
acceptEula
Defaults PRTU licenses are inactive
Command Modes privileged EXEC mode
Command History Release
IOS XE 3.4.2SG
Usage Guidelines Use this command to activate PRTU licenses that are inactive.
Downloading the license file from cisco portal and installing the license are not required. The PRTU
licenses are bundled with image. Because the PRTU license is of highest precedence, when the PRTU
license is activated, other license of the same feature switch to inactive state.
Examples The following example shows how to activate PRTU licenses:
Switch# license right-to-use activate entservices
Related Commands Command
license right-to-use
deactivate
OL-27596 -01
license right-to-use activate feature-name [acceptEula]
Specifies the feature name (e.g., entservices, ipbase, lanbase)
(Optional). Activates the PRTU license. The End User License Agreement is
accepted but does not display.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
Description
Deactivates the PRTU license
license right-to-use activate
2-399