Destination Transport-Method - Cisco Catalyst 4500 Series Command Reference Manual

destination transport-method

destination transport-method
To enable the message transport method, use the destination transport-method command.
Syntax Description
email
http
Defaults e-mail
Command Modes cfg-call-home-profile
Command History Release
12.2(52)SG
Usage Guidelines To enter profile call-home configuration submode, use the profile command in call-home configuration
mode.
Examples This example shows how to set the transport method to HTTP:
Switch(config)# call-home
Switch(cfg-call-home)# profile cisco
Switch(cfg-call-home-profile)# destination transport-method http
Related Commands Command
destination address
destination message-size-limit bytes
destination preferred-msg-format
profile
subscribe-to-alert-group all
subscribe-to-alert-group configuration
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-194
destination transport-method {email | http}
Enables e-mail as transport method.
Enables HTTP as transport method.
Modification
Support was introduced on the Catalyst 4500 series switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Configures the destination e-mail address or URL to which
Call Home messages will be sent.
Configures a maximum destination message size for the
destination profile.
Configures a preferred message format.
Enters profile call-home configuration submode
Subscribes to all available alert groups.
Subscribes this destination profile to the Configuration
alert group.
Subscribes this destination profile to the Diagnostic alert
group.
Subscribes this destination profile to the Environment alert
group.
OL-27596 -01