Show Pagp Dual-Active (Virtual Switch) - Cisco Catalyst 4500 Series Command Reference Manual

show pagp dual-active (virtual switch)

show pagp dual-active (virtual switch)
To display dual-active detection information, use the show pagp dual-active command in EXEC mode.
Syntax Description
group-number
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
Cisco IOS XE 3.4.0SG and
15.1(2)SG
Examples
The following example shows how to display dual-active detection information:
Router# show pagp dual-active
PAgP dual-active detection enabled: Yes
PAgP dual-active version: 1.1
Channel group 1
Dual-Active trusted group: Yes
Channel group 2
Dual-Active trusted group: Yes
Channel group 3 dual-active detect capability w/nbrs
Dual-Active trusted group: No
Port
Fa1/2/33
Router#
The following example shows how to display dual-active detection information for a specific port
channel:
Router# show pagp dual-active
PAgP dual-active detection enabled: Yes
PAgP dual-active version: 1.1
Channel group 3 dual-active detect capability w/nbrs Dual-Active trusted group: No
Port
Fa1/2/33
Channel group 4
Dual-Active trusted group: Yes
No interfaces configured in the channel group
Channel group 5
Dual-Active trusted group: Yes
Channel group 5 is not participating in PAGP
Channel group 10 dual-active detect capability w/nbrs Dual-Active trusted group: Yes
Port
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-874
show pagp [group-number] dual-active
(Optional) Channel-group number. Range: 1 to 256 with a maximum of 64 values.
Modification
Support for this command was introduced on the Catalyst 4500 series
switch.
Dual-Active Partner
Detect Capable Name
No None
Dual-Active Partner
Detect Capable Name
No None
Dual-Active Partner
Detect Capable Name
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Partner Partner
Port Version
None N/A
Partner Partner
Port Version
None N/A
Partner Partner
Port Version
OL-27596 -01