Cisco Catalyst 4500 Series Command Reference Manual page 703

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Table 2-19
Field
Idle
Running
No methods
Authc Success
Authc Failed
Authz Success
Authz Failed
Table 2-20
Success," "Authc Failed," or "Failed over" are displayed (the latter indicates a method ran and failed over
to the next method which did not provide a result. "Not run" is displayed in the case of sessions that are
synchronized on standby.
Table 2-20
Method State
Not run
Running
Failed over
Authc Success
Authc Failed
Examples
The following example shows how to display authentication methods registered with Auth Manager:
Switch# show authentication registrations
Auth Methods registered with the Auth Manager:
Handle Priority Name
3 0 dot1x
2 1 mab
1 2 webauth
Switch#
The following example shows how to display Auth Manager details for a specific interface:
Switch# show authentication interface gigabitethernet1/23
Client list:
MAC Address Domain Status Handle Interface
000e.84af.59bd DATA Authz Success 0xE0000000 GigabitEthernet1/0/23
Available methods list:
Handle Priority Name
OL-27596 -01
show authentication Command Output
Description
The session has been initialized and no methods have run yet.
A method is running for this session.
No method has provided a result for this session.
A method has resulted in authentication success for this session.
A method has resulted in authentication fail for this session.
All features have been successfully applied for this session.
A feature has failed to be applied for this session.
lists the possible values for the state of methods. For a session in terminal state, "Authc
State Method Values
State Level
Terminal
Intermediate
Terminal
Terminal
Terminal
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
Description
The method has not run for this session.
The method is running for this session.
The method has failed and the next method is expected to
provide a result.
The method has provided a successful authentication result
for the session.
The method has provided a failed authentication result for
the session.
show authentication
2-645