Pagp Port-Priority - Cisco Catalyst 4500 Series Command Reference Manual

pagp port-priority

pagp port-priority
To select a port in hot standby mode, use the pagp port-priority command. To return to the default
value, use the no form of this command.
Syntax Description
priority
Defaults Port priority is set to 128.
Command Modes Interface configuration mode
Command History Release
12.1(8a)EW
Usage Guidelines The higher the priority, the better the chances are that the port will be selected in the hot standby mode.
Examples This example shows how to set the port priority:
Switch(config-if)# pagp port-priority 45
Switch(config-if)#
Related Commands Command
pagp learn-method
show pagp
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-504
pagp port-priority priority
no pagp port-priority
Port priority number; valid values are from 1 to 255.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Learns the input interface of the incoming packets.
Displays information about the port channel.
OL-27596 -01