Show Pagp - Cisco Catalyst 4500 Series Command Reference Manual

show pagp

show pagp
To display information about the port channel, use the show pagp command.
Syntax Description
group-number
counters
dual-active
internal
neighbor
Defaults
This command has no default settings.
Command Modes
Privileged EXEC mode
Command History Release
12.1(8a)EW
Usage Guidelines
You can enter any show pagp command to display the active PAgP port-channel information. To display
the nonactive information, enter the show pagp command with a group.
Examples
This example shows how to display information about the PAgP counter:
Switch# show pagp counters
Port
--------------------------------------
Channel group: 1
Fa5/4
Fa5/5
Channel group: 2
Fa5/6
Fa5/7
Switch#
This example shows how to display PAgP dual-active information:
Switch# show pagp dual-active
PAgP dual-active detection enabled: Yes
PAgP dual-active version: 1.1
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-872
show pagp [group-number] {counters | dual-active | internal | neighbor}
(Optional) Channel-group number; valid values are from 1 to 64.
Specifies the traffic counter information.
Specifies the dual-active information.
Specifies the PAgP internal information.
Specifies the PAgP neighbor information.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Information
Sent Recv
2660 2452
2676 2453
289 261
290 261
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Flush
Sent Recv
0 0
0 0
0 0
0 0
OL-27596 -01