Show Errdisable Detect - Cisco Catalyst 4500 Series Command Reference Manual

show errdisable detect

show errdisable detect
To display the error disable detection status, use the show errdisable detect command.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
12.1(19)EW
Examples This example shows how to display the error disable detection status:
Switch# show errdisable detect
ErrDisable Reason
-----------------
udld
bpduguard
security-violatio
channel-misconfig
psecure-violation
vmps
pagp-flap
dtp-flap
link-flap
l2ptguard
gbic-invalid
dhcp-rate-limit
unicast-flood
storm-control
ilpower
arp-inspection
Switch#
Related Commands Command
errdisable detect
errdisable recovery
show interfaces status
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-690
show errdisable detect
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Display includes the status of storm control.
Detection status
----------------
Enabled
Enabled
Enabled
Disabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Enables error-disable detection.
Configures the recovery mechanism variables.
Displays the interface status or a list of interfaces in
error-disabled state.
OL-27596 -01