Show Ancp Multicast - Cisco Catalyst 4500 Series Command Reference Manual

show ancp multicast

show ancp multicast
To display multicast streams activated by Access Node Control Protocol (ANCP), use the show ancp
multicast command.
Syntax Description group groupaddr
source sourceaddr
interface interfacename
Defaults Displays all the multicast streams activated with ANCP.
Command Modes Privileged EXEC
Command History Release
12.2(50)SG
Examples This example shows how to display multicast streams activated by ANCP:
ANCP-Client# show ancp mul
ANCP Multicast Streams
ClientID VLAN Interface Joined on
Group 235.3.2.1
0x01060004000A0703 10 Fa7/3 18:27:35 UTC Sat Sep 13 2008
0x0106000400140703 20 Fa7/3 18:27:35 UTC Sat Sep 13 2008
0x01060004000A0704 10 Fa7/4 18:25:43 UTC Sat Sep 13 2008
0x0106000400140704 20 Fa7/4 18:25:43 UTC Sat Sep 13 2008
Group 238.1.2.3
0x01060004000A0703 10 Fa7/3 18:27:37 UTC Sat Sep 13 2008
0x0106000400140703 20 Fa7/3 18:27:35 UTC Sat Sep 13 2008
0x01060004000A0704 10 Fa7/4 18:25:43 UTC Sat Sep 13 2008
0x0106000400140704 20 Fa7/4 18:25:43 UTC Sat Sep 13 2008
ANCP-Client#
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-642
show ancp multicast [group groupaddr] [source sourceaddr] | [ interface interfacename]
(Optional) Specifies a multicast group address.
(Optional) Specifies a multicast source address.
(Optional) Specifies a multicast flowing on a specific interface.
Modification
Support for this command was introduced on the Catalyst 4500 series
switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
OL-27596 -01