Cisco Catalyst 4500 Series Command Reference Manual page 832

show ip wccp
Table 30
Field
Total Packets Unassigned
Group Access-list
Total Messages Denied to Group
Total Authentication failures
Total Bypassed Packets Received
show ip wccp service-number view
The following is sample output from the show ip wccp service-number view command for service
group 1:
Switch# show ip wccp 1 view
WCCP Router Informed of:
10.168.88.10
10.168.88.20
WCCP Cache Engines Visible
10.168.88.11
10.168.88.12
WCCP Cache Engines Not Visible:
-none-
The number of maximum service groups that can be configured is 256.
Note
If any web cache is displayed under the WCCP Cache Engines Not Visible field, the router needs to be
reconfigured to map the web cache that is not visible to it.
Table 31
Table 31
Field
WCCP Router Informed of
WCCP Clients Visible
WCCP Clients Not Visible
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-774
show ip wccp service-number Field Descriptions (continued)
describes the significant fields shown in the display.
show ip wccp service-number view Field Descriptions
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Number of packets that were not redirected because they were
not assigned to any cache engine. Packets may not be assigned
during initial discovery of cache engines or when a cache is
dropped from a cluster.
Indicates which cache engine is allowed to connect to the router.
Indicates the number of packets denied by the group-list access
list.
The number of instances where a password did not match.
The number of packets that have been bypassed. Process, fast,
and Cisco Express Forwarding (CEF) are switching paths within
Cisco IOS software.
Description
A list of routers detected by the current router.
A list of clients that are visible to the router and other clients in
the service group.
A list of clients in the service group that are not visible to the
router and other clients in the service group.
OL-27596 -01