Cisco Catalyst 4500 Series Command Reference Manual page 937

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Table 2-39
Field
Fields Associated with Classes or Service Policies
Service-policy input
Class-map
Match
Fields Associated with Traffic Policing
police
conformed
exceeded
Related Commands Command
control-plane
service-policy input (control-plane)
OL-27596 -01
show policy-map control-plane Field Descriptions
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
Description
Name of the input service policy that is applied to the control
plane. (If configured, this field will also show the output
service policy.)
Class of traffic being displayed. Traffic is displayed for each
configured class. The choice for implementing class matches
(for example, match-all or match-any) can also appear next to
the traffic class.
Match criteria for the specified class of traffic.
For more information about the variety of match
Note
criteria options available, refer to the chapter
"Configuring the Modular Quality of Service
Command-Line Interface" in the Cisco IOS Quality
of Service Solutions Configuration Guide.
police command has been configured to enable traffic
policing.
Action to be taken on packets conforming to a specified rate;
displays the number of packets and bytes on which the action
was taken.
Action to be taken on packets exceeding a specified rate;
displays the number of packets and bytes on which the action
was taken.
Description
Enters control-plane configuration mode.
Attaches a policy map to a control plane for aggregate
control plane services.
show policy-map control-plane
2-879