Macro Global Apply System-Cpp - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

macro global apply system-cpp

To apply the control plane policing default template to the switch, use the macro global apply
system-cpp global configuration command on the switch stack or on a standalone switch.
Syntax Description This command has no keywords or variables.
Defaults
This command has no default setting.
Command Modes
Global configuration mode
Command History Release
12.2(31)SG
Examples
This example shows how to apply the system-defined default to the switch:
Switch (config)# macro global apply system-cpp
Switch (config)#
Related Commands Command
macro global apply cisco-global
macro global description
OL-27596 -01
macro global apply system-cpp
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
Description
Applies the system-defined default template to the switch.
Enters a description about the macros that are applied to the
switch.
macro global apply system-cpp
2-449