Clear Interface Gigabitethernet - Cisco Catalyst 4500 Series Command Reference Manual

clear interface gigabitethernet

clear interface gigabitethernet
To clear the hardware logic from a Gigabit Ethernet IEEE 802.3z interface, use the clear interface
gigabitethernet command.
This command does not increment interface resets as displayed with the show interface
Note
gigabitethernet mod/port command.
Syntax Description mod/port
Defaults This command has no default settings.
Command Modes
Privileged EXEC mode
Command History Release
12.1(8a)EW
Examples This example shows how to clear the hardware logic from a Gigabit Ethernet IEEE 802.3z interface:
Switch# clear interface gigabitethernet 1/1
Switch#
Related Commands Command
show interfaces status
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-102
clear interface gigabitethernet mod/port
Number of the module and port.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Displays the interface status.
OL-27596 -01