Debug Platform Acl - Cisco Catalyst 2960 Command Reference Manual

Hide thumbs Also See for Catalyst 2960:
Table of Contents

Advertisement

debug platform acl

debug platform acl
Use the debug platform acl privileged EXEC command to enable debugging of the access control list
(ACL) manager. Use the no form of this command to disable debugging.
Syntax Description
all
exit
label
main
warn
Though visible in the command-line help strings, the racl, stack, vacl, and vlmap keywords are not
Note
supported.
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.2(25)FX
Usage Guidelines
The undebug platform acl command is the same as the no debug platform acl command.
Related Commands
Command
show debugging
Catalyst 2960 Switch Command Reference
B-22
debug platform acl {all | exit | label | main | warn}
no debug platform acl {all | exit | label | main | warn}
Display all ACL manager debug messages.
Display ACL exit-related debug messages.
Display ACL label-related debug messages.
Display the main or important ACL debug messages.
Display ACL warning-related debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Appendix B
Catalyst 2960 Switch Debug Commands
78-16882-01

Advertisement

Table of Contents
loading

Table of Contents