Show Nmsp - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show nmsp

To display the Network Mobility Services Protocol (NMSP) information for the switch, use the show
nmsp command. This command is available only when your switch is running the cryptographic
(encrypted) software image.
Syntax Description attachment suppress
interface
capability
notification interval
statistics connection |
summary
status
subscription detail |
summary
Command Modes Privileged EXEC mode
Command History Release
12.2(52)SG
Examples
This is an example of output from the show nmsp attachment suppress interface command:
Switch# show nmsp attachment suppress interface
NMSP Attachment Suppression Interfaces
--------------------------------------
GigabitEthernet1/1
GigabitEthernet1/2
Switch#
OL-27596 -01
show nmsp {attachment suppress interface | capability | notification interval | statistics
{connection | summary} | status | subscription {detail | summary}}
Displays attachment suppress interfaces.
Displays switch capabilities including the supported services and
subservices.
Displays the notification intervals of the supported services.
Displays the NMSP statistics information.
•
•
Displays information about the NMSP connections.
Displays the subscription information on each NMSP connection.
•
•
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
connection—Displays the message counters on each connection.
summary—Displays the global counters.
detail—Displays all services and subservices subscribed on each
connection.
summary—Displays all services subscribed on each connection.
show nmsp
2-869