Show Bootflash - Cisco Catalyst 4500 Series Command Reference Manual

show bootflash:

show bootflash:
To display information about the bootflash: file system, use the show bootflash: command.
Syntax Description
all
chips
filesys
Defaults This command has no default settings.
Command Modes
EXEC
Command History Release
12.1(8a)EW
Examples This example shows how to display file system status information:
Switch> show bootflash: filesys
-------- F I L E
Device Number = 0
DEVICE INFO BLOCK: bootflash
Magic Number
Length
Programming Algorithm = 39
File System Offset
MONLIB Offset
Bad Sector Map Offset = 3FFF8
Squeeze Log Offset
Squeeze Buffer Offset = FC0000
Num Spare Sectors
STATUS INFO:
Writable
NO File Open for Write
Complete Stats
No Unrecovered Errors
No Squeeze in progress
USAGE INFO:
Bytes Used
Bad Sectors
OK Files
Deleted Files
Files w/Errors = 0
Switch>
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-650
show bootflash: [all | chips | filesys]
(Optional) Displays all possible Flash information.
(Optional) Displays Flash chip information.
(Optional) Displays file system information.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
S Y S T E M
= 6887635
= 1000000
= 40000
= 100
= F80000
= 0
Spares:
= 917CE8
= 0
= 2
= 0
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
S T A T U S --------
File System Vers = 10000
Sector Size
Erased State
Length = F40000
Length = C628
Length = 8
Length = 40000
Length = 40000
Bytes Available = 628318
Spared Sectors = 0
Bytes = 917BE8
Bytes = 0
Bytes = 0
(1.0)
= 40000
= FFFFFFFF
OL-27596 -01