Debug Pppoe Intermediate-Agent - Cisco Catalyst 4500 Series Command Reference Manual

debug pppoe intermediate-agent

debug pppoe intermediate-agent
To turn on debugging of the PPPoE Intermediate Agent feature, use the debug pppoe
intermediate-agent command. To turn off debugging, use the no form of this command.
Syntax Description
event
packet
all
Defaults All debugging is turned off.
Command Modes
Privileged EXEC mode
Command History Release
12.2(50)SG
Examples This example shows how to turn on packet debugging:
Switch# debug pppoe intermediate-agent packet
PPPOE IA Packet debugging is on
*Sep
interface: Gi3/7, vlan : 2 MAC da: ffff.ffff.ffff, MAC sa: aabb.cc00.0000
*Sep
(GigabitEthernet3/4)
*Sep
(GigabitEthernet3/8)
*Sep
interface: Gi3/4, vlan : 2 MAC da: aabb.cc00.0000, MAC sa: 001d.e64c.6512
*Sep
interface: Gi3/8, vlan : 2 MAC da: aabb.cc00.0000, MAC sa: aabb.cc80.0000
*Sep
(GigabitEthernet3/7)
*Sep
interface: Gi3/7, vlan : 2 MAC da: 001d.e64c.6512, MAC sa: aabb.cc00.0000
*Sep
(GigabitEthernet3/4)
*Sep
interface: Gi3/4, vlan : 2 MAC da: aabb.cc00.0000, MAC sa: 001d.e64c.6512
This example shows how to turn off packet debugging:
Switch# debug pppoe intermediate-agent packet
PPPOE IA Packet debugging is off
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-166
debug pppoe intermediate-agent {event | packet | all}
no debug pppoe intermediate-agent {event | packet | all}
Activates event debugging
Activates packet debugging
Activates both event and packet debugging
Modification
Support for this command was introduced on the Catalyst 4500 series
switch.
2 06:12:56.133: PPPOE_IA: Process new PPPoE packet, Message type: PADI, input
2 06:12:56.137: PPPOE_IA: received new PPPOE packet from inputinterface
2 06:12:56.137: PPPOE_IA: received new PPPOE packet from inputinterface
2 06:12:56.137: PPPOE_IA: Process new PPPoE packet, Message type: PADO, input
2 06:12:56.137: PPPOE_IA: Process new PPPoE packet, Message type: PADO, input
2 06:12:56.137: PPPOE_IA: received new PPPOE packet from inputinterface
2 06:12:56.137: PPPOE_IA: Process new PPPoE packet, Message type: PADR, input
2 06:12:56.145: PPPOE_IA: received new PPPOE packet from inputinterface
2 06:12:56.145: PPPOE_IA: Process new PPPoE packet, Message type: PADS, input
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
OL-27596 -01