Show Diagnostic Result Module Test - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show diagnostic result module test

To display the results of the bootup packet memory test, use the show diagnostic result module test
command. The output indicates whether the test passed, failed, or was not run.
Syntax Description N
all
test test-id
detail
Defaults Non-detailed results.
Command Modes
EXEC mode
Command History Release
12.2(25)SG
Usage Guidelines The detail keyword is intended for use by Cisco support personnel when analyzing failures.
Examples
This example shows how to display the results of the bootup packet memory tests:
Switch# show diagnostic result module 6 detail
module 6:
Overall diagnostic result:PASS
Test results:(. = Pass, F = Fail, U = Untested)
___________________________________________________________________________
OL-27596 -01
show diagnostic result module [N | all] [test test-id] [detail]
Modification
This command was introduced on the Catalyst 4500 series switch.
1) linecard-online-diag --------------------> .
Error code --------------------------> 0 (DIAG_SUCCESS)
Total run count ---------------------> 1
Last test execution time ------------> Jan 21 2001 19:48:30
First test failure time -------------> n/a
Last test failure time --------------> n/a
Last test pass time -----------------> Jan 21 2001 19:48:30
Total failure count -----------------> 0
Consecutive failure count -----------> 0
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
(Optional) Specifies the module number.
(Optional) Specifies all modules.
(Optional) Specifies the number for the tdr test on the platform.
(Optional) Specifies the display of detailed information for analysis.
This option is recommended.
show diagnostic result module test
2-673