Auto Qos Classify - Cisco Catalyst 4500 Series Command Reference Manual

auto qos classify

auto qos classify
To generate a QoS configuration for an untrusted interface, use the auto qos classify interface command.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes Interface configuration mode
Command History Release
15.1(1)SG,
15.1(1)SG IOS-XE 3.3.0
Usage Guidelines
This command generates a QoS configuration for untrusted interfaces. It places a service-policy to
classify the traffic coming from untrusted desktops or devices and marks them accordingly. The
service-policies generated do not police.
Global Level Commands Generated
The global templates are defined in A, B, C.
A. Template for ACLs and application classes used by the auto qos classify command.
ip access-list extended AutoQos-4.0-ACL-Multimedia-Conf
permit tcp any any eq smtp
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-44
auto qos classify
permit udp any any range 16384 32767
ip access-list extended AutoQos-4.0-ACL-Signaling
permit tcp any any range 2000 2002
permit tcp any any range 5060 5061
permit udp any any range 5060 5061
ip access-list extended AutoQos-4.0-ACL-Transactional-Data
permit tcp any any eq 443
permit tcp any any eq 1521
permit udp any any eq 1521
permit tcp any any eq 1526
permit udp any any eq 1526
permit tcp any any eq 1575
permit udp any any eq 1575
permit tcp any any eq 1630
permit udp any any eq 1630
ip access-list extended AutoQos-4.0-ACL-Bulk-Data
permit tcp any any eq ftp
permit tcp any any eq ftp-data
permit tcp any any eq 22
permit tcp any any eq 465
permit tcp any any eq 143
permit tcp any any eq 993
permit tcp any any eq pop3
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Modification
Support for this command was introduced on the Catalyst 4500 series
switch.
OL-27596 -01