License Right-To-Use Deactivate - Cisco Catalyst 4500 Series Command Reference Manual

license right-to-use deactivate

license right-to-use deactivate
This command only applies to Catalyst 4500-X and Supervisor Engine 7-E and 7L-E.
Note
To deactivate the PRTU license use the license right-to-use deactivate command.
Syntax Description
feature-name
Defaults PRTU licenses are inactive
Command Modes privileged EXEC mode
Command History Release
IOS XE 3.4.2SG
Usage Guidelines Use this command to deactivate the PRTU licenses that are active.
The PRTU licenses can be deactivated provided any other valid license is available for the same feature.
For example, to deactivate a entservices PRTU license, the switch should contain a valid evaluation
license. Else, the deactivation will fail.
Examples The following example shows how to deactivate PRTU licenses:
Switch# license right-to-use deactivate entservices
Related Commands Command
license right-to-use
activate
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-400
license right-to-use deactivate feature-name
Specifies the feature name (e.g., entservices, ipbase, lanbase)
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Activates the PRTU license
OL-27596 -01