Cisco Catalyst 4500 Series Command Reference Manual page 357

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
This example shows how to configure the logging rate to 10 logs per 3 seconds:
Switch(config)# ip arp inspection log-buffer logs 10 interval 3
Switch(config)# end
Switch# show ip arp inspection log
Total Log Buffer Size : 45
Syslog rate : 10 entries per 3 seconds.
No entries in log buffer.
Switch#
Related Commands Command
arp access-list
show ip arp inspection
OL-27596 -01
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
Description
Defines an ARP access list or adds clauses at the end of a
predefined list.
Displays the status of dynamic ARP inspection for a
specific range of VLANs.
ip arp inspection log-buffer
2-299