Clear Lacp Counters - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

clear lacp counters

To clear the statistics for all the interfaces belonging to a specific channel group, use the clear lacp
counters command.
Syntax Description channel-group
Defaults
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(13)EW
Usage Guidelines
If you do not specify a channel group, all channel groups are cleared.
If you enter this command for a channel group that contains members in PAgP mode, the command is
ignored.
Examples This example shows how to clear the statistics for a specific group:
Switch# clear lacp 1 counters
Switch#
Related Commands Command
show lacp
OL-27596 -01
clear lacp [channel-group] counters
(Optional) Channel-group number; valid values are from 1 to 64.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
Description
Displays LACP information.
clear lacp counters
2-117