RAID operations
Figure 29: MegaRAID Power Console Plus drive status
RAID synchronization after installing a PEP
Resynchronize the RAID after you perform a software upgrade with a PEP.
To synchronize the RAID after a successful PEP installation
To restore RAID to full service after a successful PEP installation:
1. Without shutting down the server, from Windows, click Start > Programs > Power
2. Click OK.
3. In the Physical Devices section, right-click the hard disk drive that is marked
96
Avaya CallPilot® 1005r Server Maintenance and Diagnostics
Console Plus > Launch Client.
Note:
Ensure that Access Mode > Full Access is selected.
Result: The MegaRAID Power Console Plus window appears.
FAILED.
Example: A01-2-Failed.
December 2010