Configure Ospf Cost - Extreme Networks ExtremeWare Command Reference Manual

configure ospf cost

configure ospf [area <area identifier> | vlan [<vlan name> | all]] cost
[automatic | <cost>]
Description
Configures the cost metric of one or all OSPF interface(s) for all the interfaces within the area.
Syntax Description
area identifier
vlan name
all
automatic
cost
Default
The default cost is automatic.
Usage Guidelines
None.
Example
The following command configures the cost metric of the VLAN accounting:
configure ospf vlan accounting cost 10
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies an OSPF area.
Specifies a VLAN name.
Specifies all VLANs.
Determine the advertised cost from the OSPF metric table.
Specifies the cost metric.
configure ospf cost
1283