Disable Isis Export - Extreme Networks ExtremeWare Command Reference Manual

IGP Commands

disable isis export

disable isis [level-2 | area <isis area identifier>] export [bgp | i-bgp |
e-bgp | direct | rip | static | vip | ospf | ospf-intra | ospf-inter |
ospf-extern1 | ospf-extern2]
Description
Disables the redistribution of non-IS-IS routes from the kernel routing table into a IS-IS level 2
subdomain or level 1 area:
Syntax Description
level-2
isis area identifier
bgp
i-bgp
e-bgp
direct
rip
static
vip
ospf
ospf-intra
ospf-inter
ospf-extern1
ospf-extern2
Default
The default setting is disabled.
Usage Guidelines
All the redistributed routes are associated with the same metric and metric type.
Example
The following command disables redistribution of OSPF routes for a level 2 subdomain:
disable isis level-2 export ospf
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
1332
Specifies a level 2 subdomain
Specifies an IS-IS level 1 area
Specifies BGP routes.
Specifies I-BGP routes.
Specifies E-BGP routes.
Specifies direct routes.
Specifies RIP routes.
Specifies static routes.
Specifies VIP routes.
Specifies OSPF routes.
Specifies Intra OSPF routes.
Specifies Inter OSPF routes.
Specifies Extern 1 OSPF routes.
Specifies Extern 2 OSPF routes.
ExtremeWare Software 7.3.0 Command Reference Guide